Haltec

This kit conveniently holds both the 5-in-1 inspection tool and the new Checkthread tool.Checkthread Check the quality and integrity of M22 stud th...

Haltec's large bore inflation unit with in-line gauge comes equipped with an H-4660A large bore chuck and a 6 foot hose. This gauge is calibrated f...

The Haltec N-1091 valve stem garden hose water adapter is most commonly used to fill liquid filled Farm, OTR and Agricultural tires. It is designed...

Description This is a Haltec 377 Large Bore lock on air chuck (long). This air chuck locks on when cocked on the valve threads. It has greater air ...

 - SOLD IN 2-PACKS -Haltec's HE-392 valve extensions screw on the standard valve stem (.305-32 cap thread) and make the valve mouth accessible for ...

The Haltec TL-685 Large Bore and Standard Bore valve core removal and installation tool is 5 inches in length and designed for the daily rigors of ...

Haltec 310-K Calcium Gun Repair Kit Kit Includes: FP-134 Large Bore Core Remover FP-135 Adapter for Standard Valve FP-136 O-Ring for FP-135 Adapter...

-Sold in 2-Pack quantities- Haltec's OR-225-TA 25" inch Arctic earth mover loader grader tire O - Rings (.26" inch thick) are used to help create a...

Haltec's TPMS-553C 45 degree bent 1.43 inch long nickel plated grommet seal tubeless valve stems are rigorously tested and designed for use in comm...

Haltec Air-Flexx valve extensions are a flexible but rigid enough valve option to be used without the need of a rim holder, clamp or stabilizer sav...

Description Genuine original replacement part for Haltec's 310 hydro inflation valve adapter calcium chloride gun Features Genuine original replac...

Description This is a single Haltec GL-2928 M22-1.5 two piece flange wheel nut with a 28mm sleeve and a 33mm hex for uni-mount hub pilot 10 hole wh...

- Sold in Packs of 2 -  ALCOA 8864 Stabilizers Fits 22.5 and 24.5 inch Alcoa Wheels Designed for 2.50 inch Diameter Hand Holes Hole position - Off-...

This is a single Haltec H-4660A-OP large bore open flow lock on air chuck. The H-4660A-OP is a specially designed air chuck that locks onto the cap...

Haltec H-4660B-OP Large Bore Lock On Open Flow Air Chuck. H-4660B-OP is a specially designed open flow air chuck that locks onto the cap threads of...

Haltec H-2127 Valve Stem Extension Stabilizer Tire Valve Stem Extension-Stabilizer Designed for 1.5" Center Hole Wheels Specifically for 22.5x9" Al...

 Haltec H-2126 Valve Stem Extension Stabilizer Tire Valve Stem Extension-Stabilizer Designed for Off-Center 1.5" Hand Hole Wheels Specifically for ...

Haltec's CH-345 12 inch extended reach 180-degree reverse angle lock on air chuck makes tire inflation a snap on hard-to-reach tire positions. 12 ...

 -- Please Contact Us for Lead Times --                -- Prior to Ordering --  Haltec GA-276 standard & large bore gauge 18 inch length Built ...

Haltec's ES-306 Easy Lock 12 inch extended reach open air chuck with custom slide release coupler lock makes tire inflation a snap on hard-to-reach...

-Sold in 2-Pack quantities- Haltec's OR-325-TA 25" inch Arctic earth mover loader grader tire O - Rings (3/8" inch thick) are used to help create a...

The Haltec H-6116 straight high pressure inflating connector fits a .305-32 thread size with 1/8" NPT female connection. Specifically manufactured ...

The Haltec 5007 inflation connector fits .305-32 thread size with 7/16-20 thread for 1/4" flare tube fitting. Meets MS 33656E4. Maximum pressure ra...

Description The H-4660A is a specially designed air chuck that locks onto the cap threads of a Large Bore valve stem when the sliding sleeve is pus...

Description This is a pack of 50 HALTEC brand green Double Seal Inflate through type valve caps for commercial truck, RV, Semi and other high pres...

Description This is a single HALTEC CH-360 European style brass lock on closed air chuck with clip-on feature and a 1/4 - 18 inch NPT female fittin...

Description This is a single Haltec GL-2301 M22-1.5 two piece flange wheel nut with a 33mm hex for uni-mount 10 hole systems found on semi trucks. ...

- Sold in Packs of 2 -  ALCOA 2225 Stabilizer Fits 22.5 inch Alcoa Wheels Designed for 2.0 inch Diameter Hand Holes Hole position - Center

12" Standard & Large Bore Air Master Gauge equipped with recalibration feature. Operating range: 0-160 PSI Increments: 1

Use With Haltec N-1452 Fluid Nipple

Haltec AHP-20H - Hydraulic Hose  8 ft. Length Hi-Flow Male Coupler 3/8" NPT Ends

 Haltec BBH-10 Combi Hydraulic Bead Breaker     Most popular tool for breaking beads on all agricultural wheels  Used on construction wheels up ...

- Sold in 8 Pack Quantities - Haltec GL-2204 5/8-18" Left Hand Thread one piece flange nuts for hub piloted wheelsSold in 8 pack quantities 5/8"-18...

  - 2 Week Lead Time - Provides easy access to the inner dual tire found on campers, recreational vehicles, and light trucks. Fits standard valve...

- SOLD IN PACKS OF 4 -  TR-553C Valves with HN-22 hex nuts .93 inches tall, 1.43 inches in length (45° bend) Longer sealing life with greater corro...

-- Please Contact Us for Lead Times --                -- Prior to Ordering -- Haltec's N-1000 air / liquid tubeless valve stems are rigorously test...

-- Sold in Packs of 10 -- Flange Nut for Alcoa Wheels, Front Bus Wheels Weight 0.675 Grade  8 Finish Phosphate & Oil  Inner Threa...

-Sold in 2-Pack quantities- Haltec's OR-224-TGA 24" inch Arctic earth mover loader grader tire O - Rings (.26" inch thick) are used to help create ...

Haltec's TV-547D 60 degree bent 4.7 inch long nickel plated O-ring seal tubeless valve stems are rigorously tested and designed for use in commerci...

The Haltec H-6116B high pressure inflating connector fits a .305-32 thread size with 1/8" NPT female connection and is manufactured with a 70° bend...

Description Haltec's lock on open flow standard bore air chuck is designed for professional daily use. Pull the sleeve back to lock on and remove ...