Haltec

Sold in Packs of 4 Haltec GL-5902 Truck Wheel Guard for 10 Hole Wheels with 3/4 in. Diameter Studs - Stud Pilot Wheels  Bolt Circle - 11-1/4 inch I...

HALTEC Replacement Hose Assembly for NITRO-1 Nitrogen Purity GaugePart # 89BKHF-20

-Sold in 2-Pack quantities- Haltec's OR-224-TGA 24" inch Arctic earth mover loader grader tire O - Rings (.26" inch thick) are used to help create ...

H-4361 (100 Pack) Haltec's H-4361 High Pressure Valve is constructed of stainless steel bodies for use in high-pressure shock absorber units, hydra...

Haltec's TV-547D 60 degree bent 4.7 inch long nickel plated O-ring seal tubeless valve stems are rigorously tested and designed for use in commerci...

Ideal for retread centers, tire service centers and tire mounters Leak detection test  Equipped with emergency stop control  Multiple purge cycle s...

 --  50 Foot Length  --  Haltec's Extension Tubing is available in 25', 50‘ and 100‘ lengths. For proper field assembly, cut R-760 hose 2-1/4" shor...

Description Haltec's lock on open flow standard bore air chuck is designed for professional daily use. Pull the sleeve back to lock on and remove ...

Description Haltec's 42-inch black nitrogen regulator hose is designed specifically for nitrogen regulators. This hose comes complete with brass co...

Description Genuine original replacement part for Haltec's 310 hydro inflation valve adapter calcium chloride gun Features Genuine original replac...

Description Genuine original replacement part for Haltec's 310 hydro inflation valve adapter calcium chloride gun Features Genuine original replac...

AME's AHP-20* 5 Quart air hydraulic pump with steel reservoir is designed specifically for use on heavy commercial and OTR sites. It operates on 80...

Haltec's N-1012S 5/8 inch rim hole plug is designed for long term industrial use. Manufactured with the highest grade materials, this plug is desig...

Haltec's IN-95 Inflator with 20 foot long hose and convenient ball valve shut off safely removes an operator away from the blast zone when inflatin...

The Haltec N-1091 valve stem garden hose water adapter is most commonly used to fill liquid filled Farm, OTR and Agricultural tires. It is designed...

Description  Haltec's CH-410 Aircraft air chuck is designed for maximum working pressures up to 300 psi. This air chuck screws on to standard bore...

  - 2 Week Lead Time - Provides easy access to the inner dual tire found on campers, recreational vehicles, and light trucks. Fits standard valve...

 - SOLD IN PACKS OF 50 - Product Details Haltec No. Tire & Rim No. Fits Used on HN-21 HN-21 - TV-540 Series

- SOLD IN PACKS OF 50 -  TR-542 Valves with HN-22 hex nuts 1.25 inches in length Slot and external hex for easier installation O-Ring Seal for ...

Haltec I-405-3M Inflator Gauge Meets OSHA Requirements. Inflation unit with in-line gauge. Lightweight aluminum body with brass calibration bar and...

Haltec 43.1072 Circuit Board  REV 6 circuit board with push fit Designed for use in 89FSD automatic inflator

     --  Manufactured to Order ----  Please contact us for lead time  -- Haltec 89HKT-24 Designed for use on 89MXA (Red) and 89XDA (Blue) single ti...

Most popular tool for breaking beads on earthmover tires, sizes 25”-51”  Works only on 5 piece wheels with bead loosening pockets  4 ¼” (10. 8 cm)...

   -- Please Contact Us for Lead Times --                 -- Prior to Ordering --

             -- Manufactured to Order --   -- Please Contact Us for Lead Times --                 -- Prior to Ordering -- Haltec GA-280 Standard Bo...

MANUFACTURED TO ORDER  2 - 4 WEEK LEAD TIME  Ideal for retread centers, tire service centers and tire mounters High accuracy, high pressure and hig...

 - PLEASE email for availability -Manufacturing can take up to 12 weeks 100 Pack of HLI-1 standard bore military turret valves designed for 0.812 i...

-Sold in 2-Pack quantities- Haltec's OR-25-TMS 25" inch two piece wheel O - Rings (3/16 inch thick) are used to help create a seal during the insta...

3 Week Manufacturing Lead time  HALTEC AMG-4 Standard Bore Double Bend Turret Valve Fits 13/16" Valve holes Double Bend design Manufactured from So...

MANUFACTURED TO ORDER 2 - 4 WEEK LEAD TIME Product Details Ideal service centers and mounting facilities. Inflates 1-2 wheels simultaneously  3 pre...

MANUFACTURED TO ORDER 2 - 4 WEEK LEAD TIME   Product DetailsHaltec automatic inflators provide a precision tool to maintain properly inflated tire...

Hug-A-Lug for 33 mm hex flange nuts. *Requires a minimum of 3 threads protruding through lug nut; Black spacer not applicable with short lug nut. 

 AME 67300  Bust loose the most stubborn wheel nuts.  Use on commercial or agricultural wheels.  Gear ratio - 58:1.  Rated output torque: 2950 ft l...

Used to attach any Super Large Bore valve to a rim Designed to screw into a 1/2" NPT tapped rim hole Can be changed without dismounting the tire H...

- SOLD IN PACKS OF 10 -  Haltec GL-2900 Flange Nut for Aluminum Wheels; Skirt Nut Weight 0.388 Grade  8 Finish Black Inner Thread  M22-1...

PLEASE CHECK AVAILABILITY BEFORE PLACING ORDER   Designed for use with high-pressure valves, the Haltec inflating connection offers reliable perfo...

Sold in Packs of 10 Haltec's straight metal valve stem extensions screw on the standard valve stem (.305-32 cap thread) which makes the valve mouth...