Haltec

Haltec's MB-13 Mega Bore valve cap is designed to protect the core housing from damage on Mega-Bore valve stems. Each cap includes an internal O-ri...

• Easily breaks the most stubborn beads• User fatigue is reduced through the spring-action tip, which reduces kick-back• Wedge tip is forced betwee...

The Haltec 328 Short lock on air chuck locks on the valve when cocked on the threads. Designed for greater air flow and the seat cannot be blown if...

High Temperature Rated Silicone Valve Stem GrommetPart Number: G-162S, 2HP298NSN: 5325-01-478-2356Replaces NSN: 4820-01-480-3993Key Features: Desig...

 - Special Order Item -Please email for lead times  Designed specifically to work on Topy and Rimex OE wheels found on Terex, Komatsu, Liebherr and...

 - Special Order Item - - Manufactured to Order - - Please Contact for Lead Times -  Field Description Part Number TV‑573‑D23 NSN 2640‑01‑584...

 - Sold in Packs of 100 - Weight 0.0762 Hex Size 7/8 in. Height 3/4 in. Degree 60 Plating Zinc

        - Manufactured to Order - Please contact us for delivery date

HALTEC LR-49 L-Seal for 49 inch Earthmover RimsThe primary purpose of the L-ring seal is to create an air seal where the tire bead and rim bead sea...

The Haltec 4-Way Large and Super Large Bore Valve Core Remover packs four essential tools into one compact, heavy-duty design — perfect for any rep...

Haltec WH-300-J-650 Large Bore Swivel Valve Single 80º degree bend Includes a valve core, hex cap and o-ring Length - 3-1/8 inches Height - 1-5/64 ...

--PACK of 18-- Haltec's Mega Bore MB-29-85 angle connector screws onto the MB-20 spud. The other end of the connector accommodates a MB-27 rigid va...

--PACK of 54-- Haltec MB-27 Rigid Mega Bore valve can be screwed onto MB-29 angle connector or Caterpillar O-ring face seal hydraulic fittings.

Haltec WH-300-J-653 Large Bore Swivel Valve Single 80º degree bend Includes a valve core, hex cap and o-ring Length - 2-1/2 inches Manufactured wit...

--Sold in Packs of 10--  Ten Haltec H-543C - 45º degree bend 2.5" inch long nickel plated clamp-in tubeless valve stems Includes O-ring seals Manuf...

Haltec 867-12 Large Bore Rigid Brass Valve Extension All-brass extension used where mounted in straight line with valve. Full-length deflector pin ...

--Sold in Packs of 8-- Haltec 617722 Geomet coated Two-piece nut 32.5mm height 33mm hex, M22 x 1.5mm, RH thread, sleeved cap nut. Mounts single al...

 - SOLD IN PACKS OF 5 - HALTEC T-82 Clamp-In Spud Fits 13/16" diameter valve holeS Similar to the T-81 spud but with an effective length 1/4" longe...

  --  50 PACK  -- Haltec's large bore inflation unit with in-line gauge comes equipped with an H-4660A large bore chuck and a 6 foot hose. This gau...

--  25 PACK  --Haltec H-41 tubeless SP-2 spuds fit 13/16 inch rim holes and are designed for use with all Large Bore swivel valves. Used in OTR app...

 - Sold in 2 Pack Quantities -  Provides easy access to the inner dual tire found on campers, recreational vehicles, and light trucks. Fits standar...

KEN TOOL TG11D Fiberglass Handled Tire Bead Breaking Wedge  Length - 18 inches long  Weight - 4.8 lbs  Fiberglass Handle

Haltec T11E Wood Handled Tire Bead Breaking Wedge  Length - 30 inches long  Weight - 8.5 lbs  Wood Handle

PneuSpector by Buldini Incorporated Using PneuSpector you can collect tire tread depths and air pressure electronically, without using paper forms,...

- MANUFACTURED TO ORDER - PLEASE CONTACT FOR LEAD TIMES PRIOR TO ORDERING 16 inch long hand-bendable extensions Equipped with 2 lock nuts and 3/4" ...

- SOLD IN PACKS OF 50 -  TR-542 Valves with HN-22 hex nuts 1.25 inches in length Slot and external hex for easier installation O-Ring Seal for ...

Haltec I-405-3M Inflator Gauge Meets OSHA Requirements. Inflation unit with in-line gauge. Lightweight aluminum body with brass calibration bar and...

Haltec 43.1072 Circuit Board  REV 6 circuit board with push fit Designed for use in 89FSD automatic inflator

     --  Manufactured to Order ----  Please contact us for lead time  -- Haltec 89HKT-24 Designed for use on 89MXA (Red) and 89XDA (Blue) single ti...

Most popular tool for breaking beads on earthmover tires, sizes 25”-51”  Works only on 5 piece wheels with bead loosening pockets  4 ¼” (10. 8 cm)...

   -- Please Contact Us for Lead Times --                 -- Prior to Ordering --

     MANUFACTURED TO ORDERPlease check lead times prior to order Ideal for retread centers, tire service centers and tire mounters High accuracy, h...

 - PLEASE email for availability -Manufacturing can take up to 12 weeks 100 Pack of HLI-1 standard bore military turret valves designed for 0.812 i...

-Sold in 2-Pack quantities- Haltec's OR-25-TMS 25" inch two piece wheel O - Rings (3/16 inch thick) are used to help create a seal during the insta...

3 Week Manufacturing Lead time  HALTEC AMG-4 Standard Bore Double Bend Turret Valve Fits 13/16" Valve holes Double Bend design Manufactured from So...

MANUFACTURED TO ORDER 2 - 4 WEEK LEAD TIME Product Details Ideal service centers and mounting facilities. Inflates 1-2 wheels simultaneously  3 pre...

MANUFACTURED TO ORDER 2 - 4 WEEK LEAD TIME   Product DetailsHaltec automatic inflators provide a precision tool to maintain properly inflated tire...

Hug-A-Lug for 33 mm hex flange nuts. *Requires a minimum of 3 threads protruding through lug nut; Black spacer not applicable with short lug nut. 

 AME 67300  Bust loose the most stubborn wheel nuts.  Use on commercial or agricultural wheels.  Gear ratio - 58:1.  Rated output torque: 2950 ft l...