Shop Tools and Supplies

Haltec's CH-335-1 dual foot standard bore air chuck is designed for hard-to-reach tractor, dual wheel trucks and bus tires.   1/4" NPT female threa...

-Sold in 2-Pack quantities- Haltec's OR-345-T 45" inch earth mover loader grader tire O - Rings (3/8" inch thick) are used to help create a seal du...

This is a set of 5 (Five) Haltec H-5265 standard bore lock on air chucks. These are specially designed air chucks that lock onto the cap threads of...

-Sold In Packs of 10-  Haltec Corp's 32190 red silicon O-ring is a replacement part for 20 inch split rims. These are designed for extreme temperat...

 Haltec's GA-250 Large Bore and Standard air gauge features an easy to read nylon slide bar that is calibrated from 10-150 psi in 3 lb units. This ...

This Haltec large bore swivel valve has a single 90 degree bend and includes a valve core, hex cap, o-ring and lock nut. Each valve is 1-5/64 inche...

-Sold in 5-Pack Quantities-Haltec's MB-26 Mega Bore screw in spuds are designed to work with 3/4" NPT valve holes. Attach any Mega Bore angle conne...

-Sold in 5-Pack Quantities-Haltec's MB-14 Rigid Mega Bore Valves are designed to screw into any Mega Bore angle connector or Mega Bore screw in spu...

-Sold in 5-Pack Quantities-Haltec's MB-13 Mega Bore valve cap is designed to protect the core housing from damage on Mega-Bore valve stems. Each ca...

-SOLD IN 2-Pack Quantities- Haltec's OR-457-T (1/2" inch thick) 57" inch earth mover loader grader tire O-Rings are used to help create a seal duri...

-SOLD IN 2-Pack Quantities- Haltec's OR-451-T (1/2" inch thick) 51" inch earth mover loader grader tire O-Rings are used to help create a seal duri...

 Special Order Item* This state-of-the-art extruder gun is equipped with a specially designed "quick-feed" drive. The new barrel is designed to hel...

HALTEC LR-20 L-Seal for 20 inch Earthmover RimsThe primary purpose of the L-ring seal is to create an air seal where the tire bead and rim bead sea...

SPECIAL ORDER ITEM* PLEASE CONTACT US FORPRODUCTION SCHEDULE HALTEC 89-MTIS-5Ideal for multiple tire servicing Inflates up to 5 wheels simultaneous...

Please contact for availability Special order item* 6-8 weeks unless otherwise specified   General Specifications - 89XTC     Operating Temperatur...

This Haltec large bore swivel valve has a single 90 degree bend and includes a valve core, hex cap, o-ring and 2 locking nuts. Each valve is 1-5/64...

Haltec's N-1000 air / liquid tubeless valve stems are rigorously tested and designed for use in commercial and agricultural applications. These are...

 - PLEASE email for availability -Manufacturing can take up to 16 weeks Haltec N-1217 Standard Bore O-Ring Turret Valve - 3.7 Inch Long  N-1217 Sta...

   --  Sold in Packs of 5 -- H-4660A-3P - Repair Springs for H-4660A Haltec Large Bore Clip On Air Chucks

   --  Sold in Packs of 5 --   H-5265-K - Repair Kits for Haltec H-5265 Standard Bore Lock On Air Chucks

KEX Rubber Reinforced Universal Patches for Radial and Bias Ply Tires

KEX Tire Repair Stem Units with Pilot Wire

KEX Tire Repair Combi-Units with Pilot Wire

KEX Fabric Reinforced Universal Patches for Radial and Bias Ply Tires

KEX Patch-N-Plug Reinforced Vulcanizing Patches for Radial Tires

KEX Jiffy Patch Inner Tube Patches

 Please Check AvailabilityBefore Placing Order

 Please Check AvailabilityBefore Placing Order

The Haltec TL-685 Large Bore and Standard Bore valve core removal and installation tool is 5 inches in length and designed for the daily rigors of ...

 -- Please Contact Us for Lead Times --                -- Prior to Ordering -- Haltec's SLBHAT super large bore flexible valve tool uses hydraulic ...

 -- Please Contact Us for Lead Times --                 -- Prior to Ordering -- Haltec's GA-300-377 large bore air 15 inch air gauge is manufacture...

 -- Please Contact Us for Lead Times --                -- Prior to Ordering --  Haltec GA-276 standard & large bore gauge 18 inch length Built ...

Utilized on pressure containers where gauging or servicing may be required. Tank valves are used with various gases, fluids and operating pressures...

-- Up to 21 Day Manufacturing Lead Time -- The Haltec 89HKS-12B hose assembly is designed for Haltec's 89MTIS series of multiple tire inflation sys...

This is a single HALTEC 89CH-360 European style brass lock on closed air chuck with clip-on feature and a 1/4 - 18 inch NPT female fitting. It is a...

Haltec's ES-301 Easy Lock 12 inch extended reach 180-degree reverse angle open air chuck with custom slide release coupler lock makes tire inflatio...

Haltec's ES-308 Easy Lock 12 inch extended reach 15 degree reverse angle open air chuck with custom slide release coupler lock makes tire inflation...

8-12 week production lead time  Haltec's I-350-20 inflation system 1/2" ball valve with dial gauge for checking pressure. Equipped with safety coup...

Haltec 43.0106 PCB Circuit Board Circuit board for Haltec's 89XDA indoor automatic inflation system.

 --  25 Foot Length  --  Haltec's Extension Tubing is available in 25', 50‘ and 100‘ lengths. For proper field assembly, cut R-760 hose 2-1/4" shor...

Haltec CH-333-LO-OP Chrome 14 Inch Dual Foot Lock On Air Chuck 1/4 NPT Reverse Angle - Open Flow  Contents: 1 Haltec CH-333-LO chrome reverse tilt ...

 Haltec CH-333-LO Chrome 14 Inch Dual Foot Lock On Air Chuck 1/4 NPT Reverse Angle - Closed Flow  Contents: 1 Haltec CH-333-LO chrome reverse tilt ...

Sold in Packs of 100   Haltec 8500TV Valve Cores

#PB1 PREMA PB-1 Bias Tire Patch, 25 Units of 2-1/4 inch Vulcanizing Bias Tire Patches for Passenger and Truck Bias Tire Repair Includes: 25 PREMA ...

- Sold in Packs of 4 -  Haltec's TV-546E 75 degree bent 4.25 inch long nickel plated O-ring seal tubeless valve stems are rigorously tested and des...

 Haltec N-1410 Off Highway Tire Tread Depth Gauge with Magnified Sight Calibration: 1/32 In. Length: 7 In. Material: Aluminum Measures Tread Depth ...