Shop Tools and Supplies

Haltec T47A-2000K Tubeless Tire Iron Pry Bar Length - 38 in. (96 cm) Width - 7/8" Stock Weight - 5 lbs

 - Sold in Packs of 100 -  Haltec A-100-VC-8 black standard dome type valve stem caps.

Haltec TG11E Fiberglass Handled Tire Bead Breaking Wedge  Length - 32 inches long  Weight - 8.5 lbs  Fiberglass Handle

Haltec GA-165 Dual Foot Truck Service Gauge with Extended Head. Haltec No. Operating Range Increments Bar Chuck Style Finish GA-165 10-...

Haltec I-405-12LOM Inflator Gauge Meets OSHA Requirements. Inflation unit with in-line gauge. Lightweight aluminum body with brass calibration bar ...

The Haltec CH-355-LO black reverse tilt dual foot lock-on air chuck features a deep well lock that holds the chuck in place when tilted for hands f...

Haltec T46A Straight Mount / Demount Pry Bar Tool  Length - 36 inches Width - .75 inch Weight - 4.5 lbs

PLEASE CONTACT FOR AVAILABILITY  Haltec T26B Heavy Duty Impact Bead Breaker  Heavy Duty design Length - 50 inches closed, 80 inches fully extended ...

Haltec T45A Tubeless Tire Iron Pry Bar Length - 37 in. (94 cm) Width - 3/4" Stock Weight - 4.6 lbs

Haltec T45A-2000K Tubeless Tire Iron Pry Bar Length - 37 in. (94 cm) Width - 3/4" Stock Weight - 5 lbs

Haltec T45HD tubeless tire iron.41 inches in length, 7/8" (22mm) wide and 7 lbs in weight.Use on standard and large truck tires including industria...

 - Sold in Packs of 20 -   Pack of 20 Haltec G-551 grommets Fits .975 valve stem holes (RG-70 Rim Number) Temperature range from -40 - 250 degre...

Haltec's CH-335-1 dual foot standard bore air chuck is designed for hard-to-reach tractor, dual wheel trucks and bus tires.   1/4" NPT female threa...

-Sold in 2-Pack quantities- Haltec's OR-345-T 45" inch earth mover loader grader tire O - Rings (3/8" inch thick) are used to help create a seal du...

This is a set of 5 (Five) Haltec H-5265 standard bore lock on air chucks. These are specially designed air chucks that lock onto the cap threads of...

-Sold In Packs of 10-  Haltec Corp's 32190 red silicon O-ring is a replacement part for 20 inch split rims. These are designed for extreme temperat...

 Haltec's GA-250 Large Bore and Standard air gauge features an easy to read nylon slide bar that is calibrated from 10-150 psi in 3 lb units. This ...

This Haltec large bore swivel valve has a single 90 degree bend and includes a valve core, hex cap, o-ring and lock nut. Each valve is 1-5/64 inche...

-Sold in 5-Pack Quantities-Haltec's MB-26 Mega Bore screw in spuds are designed to work with 3/4" NPT valve holes. Attach any Mega Bore angle conne...

-Sold in 5-Pack Quantities-Haltec's MB-14 Rigid Mega Bore Valves are designed to screw into any Mega Bore angle connector or Mega Bore screw in spu...

-Sold in 5-Pack Quantities-Haltec's MB-13 Mega Bore valve cap is designed to protect the core housing from damage on Mega-Bore valve stems. Each ca...

-SOLD IN 2-Pack Quantities- Haltec's OR-457-T (1/2" inch thick) 57" inch earth mover loader grader tire O-Rings are used to help create a seal duri...

-SOLD IN 2-Pack Quantities- Haltec's OR-451-T (1/2" inch thick) 51" inch earth mover loader grader tire O-Rings are used to help create a seal duri...

 Special Order Item* This state-of-the-art extruder gun is equipped with a specially designed "quick-feed" drive. The new barrel is designed to hel...

HALTEC LR-20 L-Seal for 20 inch Earthmover RimsThe primary purpose of the L-ring seal is to create an air seal where the tire bead and rim bead sea...

SPECIAL ORDER ITEM* PLEASE CONTACT US FORPRODUCTION SCHEDULE HALTEC 89-MTIS-5Ideal for multiple tire servicing Inflates up to 5 wheels simultaneous...

Please contact for availability Special order item* 6-8 weeks unless otherwise specified   General Specifications - 89XTC     Operating Temperatur...

This Haltec large bore swivel valve has a single 90 degree bend and includes a valve core, hex cap, o-ring and 2 locking nuts. Each valve is 1-5/64...

Haltec's N-1000 air / liquid tubeless valve stems are rigorously tested and designed for use in commercial and agricultural applications. These are...

 - PLEASE email for availability -Manufacturing can take up to 16 weeks Haltec N-1217 Standard Bore O-Ring Turret Valve - 3.7 Inch Long  N-1217 Sta...

   --  Sold in Packs of 5 -- H-4660A-3P - Repair Springs for H-4660A Haltec Large Bore Clip On Air Chucks

   --  Sold in Packs of 5 --   H-5265-K - Repair Kits for Haltec H-5265 Standard Bore Lock On Air Chucks

KEX Rubber Reinforced Universal Patches for Radial and Bias Ply Tires

KEX Tire Repair Stem Units with Pilot Wire

KEX Tire Repair Combi-Units with Pilot Wire